Dynamic Fabrication is divided two separate facilities. One is the Welding and Fabrication Facility (shown here). The other is the Machining and Inspection facility. In the Welding and Fabrication facility, Mike employs a “work cell” system where experienced craftsman have their own work area. Watch as Mike takes you on a tour of the Welding and Fabrication facility. Dynamic Fab’s welding and fabrication equipment is listed below.

Welding Equipment

3 – Miller Aerowave 300 Tig D.R.O.
6 – Miller Dynasty DX 300 Tig D.R.O.
1 – Miller Syncrowave 350 Tig D.R.O.
1 – Miller CP-300 Mig
4 – Miller 452 Delta Weld
2 – Lincoln SP 250 Mig D.R.O.
1 – Lincoln 600 Idealarc
2 – Cobramatic #1
1 – Miller Spot Welder MPS-20
1 – Janda Spot Welder R45
2 – L-Tec Plasma Cutter
2 – Oven (Heat Treat – Pre Heat)
1 – Thermal Arc 350 Portable Welder W/Dual Feeders
1 – 36 inch welding positioner
7 – 14 inch welding positioners

Fabricating Machinery

1 – Pacific Brake 14′ x 300 Ton with Back Gauge
1 – Cincinnati Brake 10′ x 135 Ton w/CNC Back Gauge
1 – Di Arco 8′ – 100 Ton Power Brake
1 – 1/4″ x 12′ Cincinnati Power Shear
1 – 10 Gauge x 5′ Wysong Power Shear
1 – Amada Notcher 1/4″ x 8″ x 8″
1 – Ercolina Tube and Pipe Roller – 3 1/2″ Diameter
1 – Amada Laser 4′ x 8′ Table
1 – Heller-Sutherland 88 Ton Punch Press
1 – Drake 4′ – 90 Ton Hydraulic Press
1 – Drake 2′ – 30 Ton Hydraulic Press
1 – Di Arco Tube Bender
1 – HYD-Mech Horizontal Band Saw 18″ x 14”
2 – Powermate 26″ Vertical Band Saw
1 – 36″ Grob Vertical Band Saw
1 – Doringer 14″ Cold Saw
1 – Niagara Plate Bending Rolls 3″ x 6′
1 – Niagara Plate Bending Rolls 8″ x 8′
1 – Americor Plate Bending Rolls 6″ x 6′
1 – Pexto-Rolls 2″ x 2′
1 – 24″ Timesaver
1 – 70 Ton Mubea Ironworker
1 – 36″ Welding Turntable
6 – 8″ Welding Turntables
1 – 20″ Disc Grinder
1 – 16″ Cut-off Saw
7 – 6′ x 12′ Blanchard Ground Layout Tables
5 – 4′ x 20′ Blanchard Ground Layout Tables